Nickel Alloy Inconel X-750 (UNS N07750, Alloy X750, inconel X750) Round Bar / wire / plate
We are professional Inconel X750,Inconel X-750,UNS N07750,UNS No7750,Alloy X750,Alloy X-750,Inconel Alloy X750,Inconel Alloy X-750 material factory from china
We could supply inconel X-750 material in the forms of Forging parts,Forged Rings,Rolled Rings,forged shafts, hollow bars,tube sheets, forged discs,forged sleeves,round Bars,rods,flanges, Casting Parts,Pipe Fittings,elbows, reducer, tee, seamless pipe,Weled Pipes,tubings,gaskets,Plates,Sheets,Strips,Coils Wires,spring ,Fasteners,Machining Parts, and so on
Inconel 725 is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high
strength at temperatures to 1300°F. The economics of Alloy X-750 coupled with its availability in all standard mill forms has resulted in applications in a wide variety of industrial fields. Alloy X-750 may be given any one of a variety of heat treatments. Each develops special properties and puts the product form in the best condition for its intended application. In all conditions, Alloy X-750 is resistant to oxidation up to 1800°F
Applications of inconel x750
Gas turbines - Rotor blades and wheels, bolts, and other structural members.
Airframe applications - Thrust reversers and hot-air ducting systems.
Large pressure vessels.
Heat-treating fixtures - forming tools, extrusion dies, and test machine grips.
Springs and fasteners
Chemical Composition
| Grade | Ni% | Cr% | Nb% | Fe% | Al% | Ti% | C% | Mn% | Si% | Cu% | S% | Co% |
| Inconel X750 | Max 70 | 14-17 | 0.7-1.2 | 5.0-9.0 | 0.4-1.0 | 2.25-2.75 | Max 0.08 | Max 1.00 | Max 0.50 | Max 0.5 | Max 0.01 | Max 1.0 |
Specifications
| Grade | UNS | Werkstoff Nr. |
| Inconel X750 | N07750 | 2.4669 |
Physical Properties
| Grade | Density | Melting Point |
| Inconel X750 | 8.28 g/cm3 | 1390°C-1420 °C |
Mechanical Properties
| Inconel X750 | Tensile Strength | Yield Strength | Elongation | Brinell Hardness (HB) |
| Solution Treatment | 1267 N/mm² | 868 N/mm² | 25% | ≤400 |
Our Production Standard
| | Bar | Forging | Pipe | Sheet/Strip | Wire |
| Standard | ASTM B637 | ASTM B637 | AMS 5582 | AMS 5542
AMS 5598 | AMS 5698
AMS 5699 |
Size Range
Inconel X750 is available as wire, strip, sheet, rod and bar. In the wire form, this grade is covered by specification AMS 5698 for No.1 Temper and AMS 5699 for spring temper grade. No.1 Temper has a higher service temperature than Spring temper, but lower tensile strength.
Product Tags:
|
|
Round Wire Nickel High Temp Alloy Inconel X-750 UNS N07750 With Bright Surface Images
|
